Install an above ground pool

It is the most significant aspect of pool wall assembling. This ensures that the pool posts will not at any moment during and after construction prominently lean in or out. It also helps in ensuring that the liner will fit appropriately when it is fixed. Another imperative point worth noting is that in the event the pool is not perfectly round, there is a high possibility that the liner will be stretched in an unintended way.

In this case, it will form wrinkles which can be difficult to remove given that they result from the stretching of the material itself. Another cause for the wrinkles on the liner is dishing the bottom of your pool. It is, therefore, necessary to make sure that the pool is entirely round to avoid such cases. To get better results when doing this, it is advisable to call in other people to offer their assistance.

Often, the materials for constructing the wall do come with nuts and bolts. You should use them to connect the walls by tightening them. The sizes of these nuts and bolts also vary depending on the kind of your pool. So make sure that you tighten each one accordingly and seam with duct tape. You need to make the site sturdy. After digging here and there, you must ensure that you compress the loose soil around. Principally, using high-grade machinery is acceptable because they ensure the soil around is condensed appropriately.

One thing for a fact is that an above-ground pool is inadequate without a liner. This is merely a vinyl bag made to hold water within the frame of the pool. This element is also regarded as the most significant one in this kind of pool. And on the same note, it can end up being the most frustrating of all elements. In other words, there is a need for ensuring that they are handled and installed appropriately.

This is important as the vinyl need not to be damaged. It is what prevents the liner from potential slipping beneath the wall of the pool. The cove also gives a shielding cover between the liner and the metal frame of the swimming pool. Remember line is a delicate component hence you need to be careful when installing it. Open the box carefully and never use a sharp object when doing so.

During installation, ensure that they rest on the ground appropriately and should never carry any weight from water. Also, make sure that there is no air pressure in between the ground and the liner.

Additionally, just know that the manner you hang it depends highly on its style. Do everything possible to ensure that you avoid damaging by avoiding pulling, stretching or dragging it in as much as wrinkles are inevitable. If the wrinkles are too much, use a vacuum hose to decrease it and seal it using masking tape and cardboard.

Just do all you have to do and ensure that you avoid damaging the liner when installing it. If you probably find it difficult, consult the services of an expert. You have to be proficient in installing all these pool mechanisms correctly. However, it would great if you also consider services of a professional electrician. But the truth of the matter is that electricity is scary when done inappropriately. Either way, here are a few things that you got to have in mind when installing electricity in your pool:.

You must understand how many amps would be suitable for the pool before even starting the wiring process. The essence of this is to allow you to understand the specific size breaker required at the electric box. Ordinarily, an ideal above-ground swimming pool would require at least a amp breaker. It will also efficiently deliver electricity using gauge wire.

Ideally, a swimming pool can be vast and hence require more electricity needs. You have to factor in all the possible applications that will require electricity. Elements such as salt chlorine generators and ozonators need electricity. Therefore, you got to look into it and find out whether they can affect the electricity supply. You know what, there are some basic rules that you may fail to follow but still nothing major happens to you.

But when it comes to electricity, stick to the rule set by NEC. Ignoring such regulations can lead to the mother of disasters. Talk to the representatives at their local officers. They will advise you on many aspects regarding wiring of your pool. The plumbing system in an above-ground pool can be a little bit challenging. In essence, they are significant in controlling in-flow and outflow of water. So it means that you have to do it right.

It is also essential to ensure that you use the right types of pipes and other materials when installing the plumbing system. The most significant challenge always arises when you fail to level the ground appropriately. Otherwise, most of the plumbing aspects when fixed correctly will not be a cause for concern.

The pump and filter system is the central part of the above-ground swimming pool. It plays many roles such as:.

When installing this system, you first need to determine the ideal type for you. You need to make a choice based on:. Another vital element regarding the installation of pump and filter system is that it should be placed at a level point and elevated from the ground.

Do everything possible to make sure that it sits solidly on a level base. It is also important to always monitor the skimmer. It helps in enhancing its efficiency given that you will always remove the clogs from its basket hence allowing water to flow freely. While at it, you should never let the water levels to drop below the skimmer. This is one of the surest ways to put the entire filtration unit out of action and rendering it useless.

This marks part of the final stages of constructing an above-ground pool. When assembling the frames, create a consistent spacing between the track connections. As you go on, always verify the roundedness and evenness of the facility. Arrange all the posts and rails left behind and those that were loosely attached initially and attach all of them accordingly. And before tightening the bolts and the screws for the last time, make sure that you plump the posts as evenly as you can.

Now fasten the bolts and screws entirely into the rails. When doing this and any other tasks, you also need to make sure that you enhance your safety and that of any other person working on the pool.

Always wear protective gears where possible and use high-grade equipment that are easy to operate to avoid causing unnecessary injuries. In this stage, you merely need to carry out all the necessary inspection all over the pond. The interest here is to determine whether all functions are efficiently working before you can start using the pool. Inspection is wide-ranging as it involves quite some elements. You have first to confirm that every feature of the pool is safe for users.

Then, you must check if all the other aspects including electricity, pumps, and filters as well as plumbing systems are working efficiently. The ideal way for conducting a thorough inspection of a new unit is by filling water to the brim. You can now go ahead to do the tests. If in case you find any default or a malfunction from a particular feature, you need to rectify it as quickly as possible.

This will prevent the pool from further damage. But if at all you find out that every aspect of the pool is working well, you can continue filling pool to the brim.

You should then wait for a few days before finally starting swimming on it. While at it, ensure you fill the pool using clean and treated water. Contaminated water can harm you in the long run in one way or another. Normally, the above-ground swimming pool kit comes with its ladder. Pool covers for above-ground pools are also effective ways to reduce the cost of owning a swimming pool. It contains everything you need to know about swimming pool covers.

With a pool enclosure, you can swim all year round. Furthermore, it leaves enough space above the pool — you can swim after closing it.

It has everything you need to know about swimming pool enclosures. These accessories will ensure safety while making it convenient for people to use above-ground swimming pool. For a fact, your above-ground pool is not complete without a ladder and either a pool enclosure or cover.

This phase involves clearing the poolside and decorating it to look relatively appealing and convenient for swimming. The truth of the matter is that it will take quite some time before you get your ideal finished landscaping appearance. It is recommended that you use the excavated material to level the poolside yard. Several landscaping ideas are available on the internet. You can only search and work on the specific one that meets your preference. Remember this is something that will have to be progressive.

But in the meantime, you can enjoy using the above-ground swimming pool. Well, I know the process may seem hectic however; it should take you 1 to 2 days to install an above-ground swimming pool. Below are 4 videos on above ground swimming pool installation.

They will give you more insights on the above-ground pool installation process. Installing Above Ground Swimming Pool. Honestly, with this guide, I am sure you can be an expert in above ground swimming pool installation. Do you want to install an above ground pool? Reason: I am going to take you through a detailed step-by-step process on above ground swimming pool installation. By the end of this guide, you will definitely be an expert in above ground pool installation.

Straightaway, let us get to these steps:. Step 1. Get a suitable pool design option. We have several ways of obtaining them. Here is a sure way of getting the best above ground pool design: Simply Contact a Swimming Pool Contractor for Design Ideas In many cases, they often have a lot of them since that is their area of specialization.

Step 2. The truth of the matter is that you and I would always love to have peace of mind at all times. Here is the best part though: You can avoid the push and shove simply by getting a permit from the local office that deals with swimming pool installation.

What you ideally need to do is: Present your swimming pool plan Avail to them the drawing and design that indicate all dimensions Attach other necessary requirements and fill all information After that, a surveyor will be sent to your place to assess whether or not it meets the minimum requirements for constructing the above-ground swimming pool.

Step 3. Step 4. So, when you are sure that you have leveled the ground, you can add some masonry sand on the site. If you want to get more comfort, you can complete the base with floor padding. The patio blocks will work as supporting foundation so your above ground pool can stand in a more sturdy way. So, always bring the papers as you install your above ground pool. Do this step when the sun shines perfectly to ease the job. How To.